GPS Angel works right out of the box and can be installed by following these simple instructions.

1. Connect the "plug" end of the power cable firmly into the side of the GPS Angel.
2. Connect the flat end of the power cable into the cigarette lighter power adapter.
3. Put the GPS Angel on the blue gel pad and place it on your dashboard close to the windshield.
4. Insert the power adapter into your cigarette lighter plug in your car.

You will hear a chime and see green lights sweep outward while the GPS Angel searches for the satellites.

When the satelittes have been acquired the lights will freeze and you will hear another chime. This can take up to several minutes.

Your GPS Angel is now ready.

See Also:

• GPS Angel troubleshooting