GPS Angel works right out of the box and can be installed by following these simple instructions.

Charge The Battery

1. Connect the "plug" end of the power cable firmly into the rechargeable battery.
2. Connect the flat end of the power cable into any USB slot on your computer.

The battery light will be red while charging and green when fully charged. You can also use the cigarette lighter power adapter to charge the battery in your car.

After The Battery Is Charged

1. Connect the plug from under the battery firmly into the side of the GPS Angel.
2. Slide the GPS Angel into the opening of the battery.
3. Put the battery on the blue gel pad and place it on your dashboard close to the windshield.

You will hear a chime and see green lights sweep outward while the GPS Angel searches for the satellites.

When the satellites have been acquired the lights will freeze and you will hear another chime. This can take up to several minutes.

Your GPS Angel is now ready.

See Also:

• GPS Angel troubleshooting